lll

Saturday, September 17, 2011

Execute Jump-Start Technique When You guess Your Car Battery is Dead


There will be circumstances that your car may not start after repeated attempts. Then you need to check the healthiness of the battery. If you calculate your car battery has gone, then the jump-starting technique will help you to start your car and you can proceed to workshop for battery replacement. For executing the jump-start technique, you have to take help from other car of your neighbor having a healthy battery.

Execute Jump-Start Technique When You guess Your Car Battery is Dead

First contemplate for any cracks in the battery body face or its face surface. If you consideration any discontinuities on the face of the battery, never try to jump-start it. Then it is preferable to purchase a new battery. If you consideration white or green or blue residue in the vicinity of the battery leads, scrub it off with the help of a wire brush. The formation of this residue is the warning that time is nearing to replace it with a fresh battery.
Verify that the batteries in both the cars are having comparable voltage. Place the cars adjacent to each other such that the cars are not touching one an additional one and ensure both ignitions are in switched off condition in the beginning.
This is the universal custom that each battery has two leads. One is marked sure (+ ve) and the other one is negative (- ve). The sure concluding of the battery usually has a wrap covered over it and a bunch of wires attached to it. Commonly the exposed plain black wire is linked to negative concluding of the battery. In order to do a safe jump-start you must ensue the sequence of operations. You have to start work first with the dead battery.
Connect one end of a cable to the sure lead of the dead battery. Now associate the other end of the same wire to the sure lead of the starting car. Take an additional one cable and associate one end of it to the negative lead of the starting car. The second of this cable is linked to motor block of your car having dead battery at essentially unpainted metal surface. Please keep in mind that negative cable should not be linked to the dead battery itself.
Now ensure all connections are proper. After ensuring the firm connections now start the car that is used for jump start and keep it in idling for 5 minutes. Now start the car having dead battery. The car must start, if it is not then wait for few more minutes and try for next attempt. If your car does not start then it is not going to start. You need to have help of a tow truck.
The whole policy needs proper care. The following points help you in preventing damage to your hands and car. Always use gloves while cleaning the residue matter that is formed at the battery leads. These corrosion products can be nasty if it touches your skin. After ensuring the proper connections keep you away from the hood areas of the cars. Safety goggles will help you in case of unexpected circumstances. While disconnecting the cables you must ensue the same direction in the reverse way. That means you have to disconnect from the block first and sure lead of the starting car last. The most leading thing is smoking is strictly prohibited while executing the whole operation.
Execute Jump-Start Technique When You guess Your Car Battery is Dead

CERTAIN CONTENT THAT APPEARS COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Twitter Delicious Facebook Digg Stumbleupon Favorites More